Next: 1 Executive Summary
Up: Case Studies Index
Previous:Case Study SAR Index
1.0 Executive Summary
- 1.1 SAR Benchmark Summary
- 1.2 RASSP Process
2.0 SAR Problem Overview
- 2.1 SAR System
- 2.2 SAR Processing Algorithms
- 2.3 Form Factor Contraints
- 2.4 Accuracy
- 2.5 Latency
- 2.6 Data Interfaces
- 2.7 Control and Diagnostic Interface
- 2.8 Summary
3.0 System Design
- 3.1 System Process Description
- 3.1.1 RASSP Innovations in the System Design Process
- 3.2 System Requirements Analysis
- 3.2.1 Executable Specification
- 3.3 Functional Analysis
- 3.4 System Partitioning
- 3.5 Lessons Learned in the System Design of the SAR Benchmark
4.0 Architecture Design
- 4.1 Architecture Process Descripion
- 4.1.1 RASSP Innovations in the Architecture Design Process
- 4.2 Functional Design
- 4.2.1 Architecture Sizing of SAR Algorithm
- 4.2.2 Flow Graph Generation
- 4.2.3 Develop Command Program
- 4.3 Architecture Selection
- 4.3.1 Initial Size, Weight and Power
- 4.3.2 Architecture Definition
- 4.3.3 Performance Modeling
- 4.3.4 Architecture Trade-off Analysis
- 4.4 Architecture Verification
- 4.4.1 Abstract Behavior Simulation
- 4.4.2 Autocode Generation
- 4.5 Lessons Learned In the Architecture Design of the SAR Benchmark
- 4.5.1 Hierarchical Simulation (Performance Modeling)
- 4.5.2 Hierarchical Simulation (Abstract Behavior)
- 4.5.3 Autocoding Software
5.0 Detailed Design
- 5.1 Detailed Design Process Description
- 5.1.1 RASSP Innovations in the Detailed Design Process
- 5.2 DATA I/O Module Design Process
- 5.2.1 Detailed Behavioral/RTL Modeling
- 5.2.2 Detailed Board Design Process
- 5.2.3 FPGA Design Process
- 5.2.4 Fabricate and Assemble Data I/O Module
- 5.3 Lessons Learned in Detailed Design
6.0 Integration and Test
- 6.1 Integration and Test Process Description
- 6.2 Integration and Test
- 6.3 Document Update
- 6.4 Acceptance Test
- 6.5 Lessons Learned in Integration and Test
- 6.5.1Virtual Prototype
- 6.5.2 Design for Testability
- 6.5.3 Test and Integration Environment
7.0 Conclusions
8.0 Acronym List
9.0 Glossary
10.0 References
- 10.1 Application Notes
- 10.2 Articles / Presentations
A Appendix
- A.1 Introduction to Data-Flow Methodology
- A.1.1 Control Driven Versus Data Driven Computing
- A.1.2 Data Flow Design
- A.2 Autocoding the Synthetic Aperture Radar (SAR) Using GEDAEā¢
- A.2.1 Building the SAR Application
- A.2.2 Running the Graph
- A.2.3 Distributing or Embedding the Graph
Next: 1 Executive Summary
Up: Case Studies Index
Previous:Case Study SAR Index
Page Status: in-review, January 1998
Dennis Basara